Gateway Manager - D-Link 804 configuration

Overview

The D-Link 804 can be easily configured to support Personal Phone Gateway.

To configure, please follow the directions below.

Open the setup web page

•    Enter http://192.168.0.1/adv_serversettings.htm in your browser

•   Set the DMZ to 192.168.0.0

•   Enter the Internal I.P. address of the PC with the Personal Phone Gateway card installed.

•   Enter 1720 ~ 1720 as the first Service Port Range

•   Enter 6667 ~ 6667 as the second Service Port Range

The PC running Personal Phone Gateway can be used just like any other PC on your network.

Note: Ensure that you are running firmware 4.68 or later, you can download the latest firmware from; ftp://ftp.dlink.com/Gateway/di804/